FAQs
Our knives are made 100% in Utah, USA.
The knives that we manufacture are made primarily from CPM-MagnaCut due to its unparalleled performance in terms of toughness, edge-retention, corrosion-resistance, and ease of sharpening.
DLC stands for "Diamond Like Carbon" and its considered one of the most durable and premium coatings in the knife world. DLC coatings lower friction, offer high wear resistance, and enhance hardeness.
OTF Knife Cleaning and Lubrication: With the blade retracted, use compressed air to blow into the knife handle and remove any lint or debris trapped inside. Next, apply a single drop of any type of gun lubricant at the center of the blade near the choil and actuate the blade upside down approximately 10 times. This will distribute the lubricant throughout the mechanism and keep your knife operating smoothly.
Axial offers free lifetime sharpening under our Ironclad Guarantee. Check out our Ironclad Guarantee Page to learn how to take advantage of this service.
- Blade Angle: 20 degrees is recommended on Axial knives.
Our Ironclad Guarantee is our no B.S lifetime warranty, sharpening and maintenance. Click here to learn more.
Our knives sell out extremely fast. Most of our knives are released on a limited basis - when they sell out they are gone until the next future drop.
We sell mainly from our website via knife drops. We communicate the date and time of our drops through emails, texts, and our instagram. Once the knives go live on our site, they are first come, first serve so be prepared to act fast!
We do not currently have a storefront.
We do not offer local pickup due to zoning restrictions.
At this point in time, we do not offer tours of our manufacturing facility.
We don't offer pre-orders, but make sure your signed up for our emails so that you're the first to know about upcoming knife drops.
Orders ship within 24 hours unless noted otherwise on the product page.
We allow international shipments on a limited basis. If you live outside of the United States and would like to place an order, please contact us to determine whether or not we can ship a specific item internationally.
We have a 30-day return policy which means you have 30 days after receiving your item to request a return. To be eligible for return, your item must be in its original condition and packaging. You'll also need the receipt or proof of purchase. To start a return, submit a return request at the link below:
Customer Service: info@axialknives.com